Speedlite Accessory
Canon Speedlite EL-10
SpecificationsSpecifications
- Bounce head
- LCD Panel
- Electronic dial
- Catchlight panel
- Wide panel
- 21-pin multifunction shoe
- Menu direct button
- Stand
Specifications in detail
Power
- Guide Number (ISO100) Meters40
Zoom
- Zoom HeadAuto/Manual
- Coverage with Wide Panel14mm
- Auto Zoom for Sensor SizeYes
Flash Modes
- Auto Exposure ControlE-TTL II / E-TTL
- High Speed Sync (FP)Yes
- Manual / Output SettingsYes - 1/1 to 1/1024
- Manual Steps1/3-stops
- Continuous Flashes in a BurstMaximum at full power: Approx. 651
- Strobe / Output SettingsNot supported
- Stroboscopic FrequencyNot supported
Flash-Related Function
- FE LockYes
- FE MemoryYes
- Flash Exposure Compensation±3 stops
- Flash Exposure Bracketing±3 stops
- Second-Curtain Flash SyncYes (including wireless)2
- Modelling FlashNo (supported as off-camera receiver unit only)3
- Modelling LampNo
- Colour Temperature Info CommunicationYes
Wireless Flash
- TransmitterYes
- Transmission TypeRadio only
- Transmitter Range30m (approx.)4
- ReceiverYes
- Max. Number of Transmitters / Receivers15 / 15 (16 in total of any combination)
- Number of Groups5 (A/B/C/D/E)
- Number of ChannelsAuto, 1-15
- Remote Shutter ReleaseYes
Flash Head Movement
- Up45, 60, 75, 90, 90 °
- Down0 °
- Left60, 75, 90, 120, 150 and 150 °
- Right60, 75, 90, 120, 150 and 180 °
AF Assist
- AF-Assist BeamFlash strobe
- Number of AF Points Supportedn/a
Power Source
- Battery4 x AA batteries5
- Battery Level IndicatorNo
- Minimum Recycling Time
- Number of Flashes (Fully Charged Battery)210-14008
- External Power SupplyNo
Construction
- Dust and Water ResistanceNo
- Active CoolingNo
- Mounting Foot MaterialMetal
Miscellaneous
- Custom Function11 x C.Fn / 8 x P.Fn
(plus 3 x Custom Modes (C1, C2, C3)) - Flash Settings from Camera MenusYes9 - On-flash Menu Direct button
- External Flash Exposure SensorNo
- PC TerminalNo
- Accessories (Included)Speedlite Case
Mini Stand
Mounting foot cover - Accessories (Optional)Speedlite Transmitter ST-E10 (Multi-Function foot)
Speedlite Transmitter ST-E3-RT (Ver.2) (Standard 5-pin foot)
EX series Speedlites with radio receiver function
Physical Specifications
- Dimensions (W x H x D)Approx. 70.6 x 116.3 x 98.3 mm
- Weight287
- When using new AA/LR6 alkaline batteries, based on Canon standards and set to manual flash. Continuous flash count at full output until flash firing restriction Level 1.
- With compatible cameras/devices and not available with stroboscopic shooting.
- Modeling flash cannot be used when mounted on a camera
- Without any obstructions between sender and receiver, and without external radio interference. Arrangement of units and other external factors may affect the range/performance.
- LR6 alkaline or HR6 Ni-MH type batteriescan be used. FR6 lithium batteries cannot be used.
- When using new AA/LR6 alkaline batteries, based on Canon standards and set to manual flash. Continuous flash count at full output until flash firing restriction Level 1.
- 1/1024 to 1/1 power charging time required for firing.
- When using new AA/LR6 alkaline batteries, based on Canon standards and set to manual flash. Continuous flash count at full output until flash firing restriction Level 1.
- With compatible cameras.