Canon SELPHY Square QX10
Specifications
Operational Environment
5 - 40 °C, 20 - 80% humidity
Dimensions
Approx. 102.2 x 143.3 x 31.0 mm (excluding protrusions)
Weight
Approx. 445g (excluding ink cartridge and label)
Specifications
Dye Sublimation Printing
For vibrant, smooth and rich images
XS-20L Square Photo Paper
Print square images and stickers that have a writable border
100 Year Print
Prints will remain high quality up to 100 years
Specifications in detail
Printing System
Method
Dye-sublimation thermal transfer printing system
Maximum resolution
287 x 287 dpi
Colours
3 colour inks (yellow, cyan, magenta) with protective over coating
256 levels per colour (24 bit colour depth)
Media & Cartridge
Sticker paper
72 x 85 mm, 68 x 68 mm printable area
Ink Cartridge
Included with media
Image Longevity
100 Years Print 1
Print Speeds
Sticker paper
approx. 43 sec 2
Printing
Print Modes & Settings
Controlled by SELPHY Photo Layout app
Print Method
Direct From a Smart Device
Compatible iOS and Android devices via Direct Wi-Fi, using app SELPHY Photo Layout
Power Source
AC Power Supply
Not supported
Battery Pack
Built-in, 20 sheet maximum print capacity per full charge
Power Consumption
3W or less (standby), 62W or less (printing)
Accessories
Media
Color Ink / Label Set XS-20L
Other
USB Micro B connector to USB Type-A connector for charging (included)
All data is based on Canon's standard testing methods.
Subject to change without notice.
- To test the image permanence of prints that are stored in an album, we use an accelerated testing method similar to how the image permanence of silver-halide photo papers are measured when stored in dark places. Print samples are printed with the optical density of 1.0 (each Bk, C, M,Y). The samples are kept in a certain environment of high temperature and 50% humidity. The rate of the decrease in the optical density and rate of yellow discoloration are recorded. The recorded results are then converted to the length of time when print image is kept in an environment of 23℃/ 50％ humidity. <Criteria for estimation of print longevity> 'The point where monochromatic/ reflective optical density shows loss of 30% (starting density of 1.0).
- Print speed can vary dependent on data size, print method, and print finish setting. Print speed is measured from start of printing excluding paper handling
