Canon DP-V1711
Specifications
Key Features
UHD (3840 x 2160) resolution
DCI (2048 x 1080) resolution
Supporting 4 x 4K/50P single cable inputs
Specifications in detail
Panel
Panel type
IPS LCD panel
Screen size
17.3 inch（43.8cm）
Aspect Ratio
16:9
Resolution
3840 x 2160 (8.3 megapixels)
Active display area
Approx. 381.9 x 214.8mm
Pixel Pitch
99μm / 255 ppi
Image Quality
Brightness
Standard: 100 cd/m2
Peak, Full screen white:
300 cd/m2
600 cd/m2 (Available with an additional purchased licence, and when "Boost on" is selected)
Viewing angle (Up, Down, Left, Right)
89° (Contrast ratio 10:1 or higher)
Surface treatment
Anti glare coating
General
Backlight type
LED, Matrix Array
Power
Rated Voltage: AC100～240V
DC 12 V Max. 10 A、XLR terminal
Rated Frequency: 50/60Hz
Power Consumption
At maximum load (including change in brightlness through aging): Approx. 140W
At factory shipment: Approx. 85W
Environmental Conditions
Operating:
Temperature and humidity: 0 － 40 ℃ (32 － 104 °F) (20 – 85 % RH no condensation)
Recommended: 15 － 30 ℃ (59 － 86 °F)
Pressure: 700－1060 hPa
Storage/Transporting:
Temperature and humidity: -20 to 40 ℃(-4 – 104 °F) (20 – 85 ％ RH no condensation)
41 to 60 ℃ (105 – 140 °F) (20 - 30 % RH no condensation)
Pressure: 700 – 1060 hPa
Dimensions (width x height x depth)
With stand and handle: Approx. 435×356×194 mm (17.1×14.0×7.6 in.)
Display unit only, without protruding parts: Approx. 435×308×154 mm (17.1×12.1×6.1 in.)
Weight
Approx. 8 kg
Mounting Hole Pitch
VESA standard 100x100 mm (3.9 × 3.9 in)
Interface
Input
12G/6G/3G/HD-SDI:
4 (1 system) BNC (75Ω) receptacle terminal
12G-SDI：SMPTE 2082 compliant
6G-SDI：SMPTE 2081 compliant
3G-SDI：SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant
HD-SDI：SMPTE 2048-2/274M/292-1/296/428-19/428- compliant
HDMI: 1（1 system）Type A terminal
Copy protection: HDCP 2.2
Output
12G/6G/3G/HD-SDI: 4 (pass-through 1 system)
Headphone: 1 Stereo mini-jack, Supported impedance: 32Ω to 64Ω
Others
USB: 1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible
Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0 compliant
LAN: 1 RJ-45 terminal
IEEE802.3 10BASE-TX/IEEE802.3u 100BASE-TX compliant
REMOTE: 1 RJ-45 terminal, GPI 8 pin
Other Features
Tally lamp
Red / Green / Amber
