Canon DP-V2411
Specifications

IPS LCD panel

24 inch (61.1 cm)

17:09

4096×2160 (8.8 megapixels)

540.7×285.1 mm

132 μm/193 ppi

100 cd/m² (standard) 

600 cd/m² (Maximum with Full screen white) 

1,000 cd/m² (typical with boost function)*

D93, D65, D61, D60, D56, D50, DCI-P3, Custom

SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3, Native, Cinema Gamut to 709, Cinema Gamut to 2020, Cinema Gamut to DCI, DCI-P3+ to 709, DCP-P3+ to DCI, Preset Gamut 1 to 709, Preset Gamut 1 to 2020, Preset Gamut 1 to DCI, Preset Gamut 2 to 709, Preset Gamut 2 to 2020, Preset Gamut 2 to DCI, Gamut LUT 1~8

ITU-R BT.2020(Constant luminance / Non-constant luminance), ITU-R BT.709

1.0, 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886(CRT), Canon Log, Canon Log 2, Canon Log 3,
Canon Log (HDR), Canon Log 2 (HDR), Canon Log 3 (HDR), SMPTE ST 2084 (PQ)
Hybrid Log-Gamma, Hybrid Log-Gamma RGB, Preset Log 1, Preset Log 2
Gamma LUT 1-8

89° (contrast ratio 10:1 or higher)

Anti glare coating

LED, Matrix Array

Rated voltage: AC 100 - 240 V  Rated frequency: 50/60 Hz

DC 24 V  max. 10 A, XLR terminal

At maximum load (including change in brightness due to aging): Approx. 230W

At factory shipment: Approx. 130 W

Usage

Temperature and humidity: 0 - 40 ℃ (20 - 85% RH no condensation)
Recommended temperature:15 - 30 ℃ (20 - 85% RH no condensation)
Pressure:  700 - 1060 hPa

Storage/Transporting

Temperature and humidity: -20 - 40 ℃ (20 - 85% RH no condensation)
41 - 60 ℃（20 - 30% RH no condensation)
Pressure: 700 - 1060 hPa

Approx. 576×438×180 mm (including handle and stand)

Approx. 576×387×105 mm (Display unit only, without protruding parts)

Approx. 12 kg

VESA standard　100×100 mm

12G/6G/3G/HD/SD-SDI

4 (1 channel)  BNC (75 Ω)  Receptacle terminal
12G-SDI: SMPTE 2082 compliant
6G-SDI: SMPTE 2081 compliant
3G-SDI: SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
SD-SDI: SMPTE 259M compliant

HDMI

1  Type A 　　Copy protection: HDCP 2.2

12G/6G/3G/HD-SDI

4 (Pass-through)

Headphone

1 stereo mini-jack, supported impedance: 32 Ω - 64 Ω

USB

1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant  LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible
Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0 compliant

LAN

1 RJ-45 terminal
IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant

REMOTE

1 RJ-45 terminal, GPI 8 pin